Wearable Large Flow Static Discharging Diaphragm Pump Wet Grinding Bead Mill Machine
The main introduction of Bead Mill Machine
1. The compact and stable structure : the motor is placed on the upper part, the grinding chamble is placed on the lower part, and the total height of the equipment is low. More than 20L large model sander with cylinder slide rail for easy maintenance.
2. Double end mechanical seal: It has 2 patented technologies, with forced coolant, sealing ring resistant to 1600 kinds of solvents, coolant is compatible with materials, no pollutants, reliable operation.
3. Discharging separation system :Large flow, nonclogging: dynamic hollow rotor-super large area slot cylinder separator uses dynamic centrifugal force separation principle.Use of extremely small grinding beads ( 0.3 to 3 mm).No export blockage occurs under high flow conditions. Good heat dissipation, narrowest particle size distribution.
4. Grinding inner chamber : It has two patented technologies: chamble cooling and disassembly. The chamber volume is from 0.6-300L. The materials are stainless steel, alloy steel, ceramic, hard alloy, polyurethane, etc.
5. Operation control: basic button type of operation column, more integrated higher control system and PLC Allwin data acquisition hardware and software system, and more process control and process optimization system.
The advantages:
L 1. Long history and plentiful experiences with 28 years, The founder of ALLWIN,Mr. Yongqi WANG , he was the first Chinese designer of sand/bead mill in 1967;
2. Master the core technology of dispersing and grinding;
3. High efficiency and low energy consumption;
4. Stable, high efficiency and low maintenance.
5. With ISO9001 certification and more than 11 patents of Bead Mill
The Application filed:
- Paint and coating,pigment and dyestuffs,
- printing inks/ digital inkjet ink,gravure inks,
- medicine and cosmetics,pesticide and agrochemical industry,f
- ood and food processing,non-metallic minerals,hI-Tech nanometer products,
- paper and paper making chemical
- titanium dioxide
The main techinical data:
| No | Main parameters | AP100 | Note |
| 1 | Explosion-proof motor kW | 55 kW ( Ex) | |
| 2 | Effective volume of grinding chamber (L) | 100 | |
| 3 | Water pressure (MPa) | 0.3 | |
| 4 | Cooling water consumption (L/min) | 2.5 -3m3/h | Advise offer the Cooling water less 10°C |
| 5 | Dimensions:L*W*H (mm) | 2100*900*2000 | |
| 6 | Weight (kg) | 2100 | |
The main Configuration instructions:
| No | Main parts materials | AP 100 explosion-proof | Notes |
| 1 | External cylinder | 304 stainless steel | |
| 2 | Internal cylinder | 9Cr18Mo alloy steel | customized service offered |
| 3 | Dispersing shaft | 40Cr with hard chromium plating | |
| 4 | Dispersing disk | 9Cr18Mo alloy steel | |
| 5 | Feeding and discharging end covers on the cylinder | 304 stainless steel | |
| 6 | centrifugal separator and pins | 304 stainless steel and YG6 pins | |
| 7 | Static discharge screen ring | Stainless Steel Wire Wrapped Screen.Gaps: 0.5mm. | |
| 8 | Mechanical seal | double end mechanical seal with mandatory lubricating-cooling system | |
| 9 | Feeding pump | 1.5” ARO diaphragm pump; | |
| 10 | Appliance configuration | Explosion-proof machine, suitable for water/oil based materials, motor 55kW. Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves.operation manner: (button type) | |
| 11 | Fasteners and connecting parts | Stainless steel clamp-type connecting parts | Quick and convenient |
The detailed production show:
The package and shipping: Be covered with anti-abrasion film and then packed in wooden boxes, then seashipping by FCLor LCL.
Also offered the related products: Dispersing machine & the Zirconical beads, This 2 products are much important for the Bead mills, this materials is pre-dispersing well, It's better for grinding with bead mill after pre-dispesing well. Also the zirconia beads (grinding beads with different size for meeting different finally fineness.
The After sales service:
1. Video instructions for installation and commissioning, if need, we will arrange engineer to your factory.
2. 12-24H feedback any customers questions, firstly offer the video help you solving, if need arrange maintenance engineer for you.
If need more detailed information and Price, please don't hesitate contact us, Also Warmly welcome to visit us.
Product Tags:
|
|
Wearable 9Cr18Mo Ink Grinding and dispersing Sand Mill Machine Pigment Large Flow Images
|
